Design and analysis of pressure data of high pressure roller press

In order to better realize the crushing of materials, the high pressure roller press needs to design the high pressure value of the active and passive rollers under the working condition, to prevent the materials from jumping during the crushing process and to realize the crushing of materials. The design of high pressure value and the structure of the equipment related factors are as follows:

1.     High-pressure roller press crushing ratio, the size of the crushed material and roller press roller sleeve ratio, the larger the ratio data, the greater the pressure, the pressure value through the high-pressure roller press hydraulic system integration.

2.     Pressure value calculation, need to refer to the hardness of the crushed material.

3.     High pressure roller press roller sleeve with Hard Alloy Stud to do high wear layer, improve the service life of the high pressure roller press, Pin Stud density and pressure to match the size of the material deposited in favor of the principle.

4.     High pressure roller press energy storage device to do pressure regulation, compensation. Prevent the impact of metal objects in the material on the working surface of the roller press.

5.     High-pressure roller press roller sleeve width design, and high-pressure roller press pressure numerical calculation, reasonable pressure design can improve the roller press roller sleeve corrective capacity.

For more information about HPGR Carbide Pin, pls visit our web: https://www.tyhpgrcarbidestud.com/hpgr-hard-alloy-pins/